SC(JGA) Series Imported Copper Connecting Terminal
Imported C45 pin, material red copper tube, surface tin-plated. Designed for heavy-duty cable terminations in power distribution, industrial equipment and electrical panels. Covers conductor cross-sections from 10 mm² to 240 mm².
- Terminal Material
- Imported Copper (tin-plated)
- Available Types
- 10°, 16°, 25°, 35°, 50°, 70°, 95°, 120°, 150°, 185°, 240°
- Barrel Diameter (D)
- 7.5-26 mm
- Wire Diameter (d)
- 5-21 mm
- Total Length (L)
- 34-85 mm
- Barrel Length (L1)
- 13.5-31 mm
- Surface Finish
- Tin-plated
- Application
- Cable connections in electrical systems
SC(JGA) Series SC(JGA) Series Imported Copper Connecting Terminal Specifications
Complete product dimensions and model selection.
| Model & Spec Type | D (mm) | d (mm) | L (mm) | L1 (mm) |
|---|---|---|---|---|
| SC(JGA)-10² | 7.5 | 5 | 34 | 13.5 |
| SC(JGA)-16² | 8.5 | 6 | 35 | 14 |
| SC(JGA)-25² | 10 | 7 | 36 | 14.5 |
| SC(JGA)-35² | 11 | 8 | 37 | 15 |
| SC(JGA)-50² | 13 | 10 | 41 | 15.5 |
| SC(JGA)-70² | 16 | 12 | 45 | 16 |
| SC(JGA)-95² | 18 | 14 | 50 | 18 |
| SC(JGA)-120² | 20 | 15 | 57 | 20 |
| SC(JGA)-150² | 22 | 17 | 67 | 24 |
| SC(JGA)-185² | 24 | 19 | 77 | 28 |
| SC(JGA)-240² | 26 | 21 | 85 | 31 |
Product Structure & Dimensions
Get a Quote
Send us your wire size, stud size and quantity — we reply within 24 hours.
Looking for SC(JGA) Series SC(JGA) Series Imported Copper Connecting Terminal?
Contact our team for product specifications and quotation inquiries.
Frequently Asked Questions
What are SC(JGA) Series imported copper connecting terminals used for?
SC(JGA) Series terminals are heavy-duty cable lugs designed to terminate large cross-section copper or aluminum conductors. They are widely used in power distribution panels, transformer connections, motor starters, bus-bar systems and industrial switchgear where a secure, low-resistance bolted connection is required.
What materials and surface treatment are used in SC(JGA) terminals?
SC(JGA) terminals are manufactured from imported C45 red copper tube (紫铜管) with a tin-plated (镀锡) surface finish. The tin plating enhances corrosion resistance, reduces contact resistance and extends service life in humid or mildly corrosive environments.
What conductor cross-sections does the SC(JGA) Series cover?
The series covers 10 mm² to 240 mm²: SC(JGA)-10², 16², 25², 35², 50², 70², 95², 120², 150², 185² and 240², making it suitable for a wide range of medium-to-large power cable terminations.
What crimping tools are recommended for SC(JGA) terminals?
Hydraulic crimping tools with matched die sets are recommended for sizes 50 mm² and above. Manual ratchet crimping tools are acceptable for smaller sizes (10²–35²). Always select the die size that matches the conductor cross-section to achieve a gas-tight, low-resistance crimp meeting IEC 61238-1 requirements.
Are SC(JGA) terminals interchangeable with DT Series copper cable lugs?
Both SC(JGA) and DT Series are copper cable lugs for large conductors, but they differ in design standard: SC(JGA) follows the imported C45 standard with a distinctive tube-body profile and specific D/d/L/L1 dimensions, while DT Series follows the Chinese GB/T 14315 standard with oil-blocking construction. They are not mechanically interchangeable without verifying hole diameter and barrel length.