DTL Series Copper-Aluminum Cable Lug
DTL Series copper-to-aluminium bimetal cable lugs have a T2 copper palm friction-welded or cold-pressed to a 1060 aluminium barrel. The transition eliminates galvanic corrosion at the aluminium-to-copper interface and allows aluminium cable to terminate on copper busbars in switchgear and transformers.
- Terminal Material
- T2 copper / 1060 aluminium bimetal
- Wire Range
- 10–600 kcmil / 6–300 mm²
- Stud Size
- M6 – M20
- Surface Treatment
- Tin-plated
- Standard
- GB/T 14315
DTL Series DTL Series Copper-Aluminum Cable Lug Specifications
Complete product dimensions and model selection.
| Item No. | Φ (mm) | D (mm) | d (mm) | L (mm) | L1 (mm) | W (mm) | S (mm) |
|---|---|---|---|---|---|---|---|
| DTL-10 | 8.8 | 10 | 5.2 | 65 | 32 | 16 | 2.5 |
| DTL-16 | 8.8 | 11 | 6.1 | 70 | 34 | 16 | 2.6 |
| DTL-25 | 8.8 | 12 | 7.1 | 75 | 37 | 18 | 3.2 |
| DTL-35 | 10.8 | 14 | 8.5 | 85 | 41 | 20 | 3.6 |
| DTL-50 | 10.8 | 16 | 9.8 | 90 | 43 | 23 | 4.0 |
| DTL-70 | 13 | 18 | 11.5 | 102 | 50 | 26 | 4.6 |
| DTL-95 | 13 | 21 | 13.5 | 112 | 54 | 28 | 4.8 |
| DTL-120 | 14.8/ | 23 | 15 | 120 | 56 | 30 | 5.3 |
| DTL-150 | 14.8 | 25 | 17 | 126 | 58 | 34 | 5.8 |
| DTL-185 | 17 | 27 | 18.6 | 133 | 60 | 37 | 6.5 |
| DTL-240 | 17 | 30 | 21.5 | 140 | 63 | 40 | 7.0 |
| DTL-300 | 21 | 34 | 24 | 158 | 70 | 45 | 8.5 |
| DTL-400 | 21 | 38 | 27 | 175 | 75 | 52 | 9.5 |
| DTL-500 | 21 | 45 | 30 | 190 | 80 | 60 | 10.0 |
| DTL-630 | - | 50 | 34.2 | 225 | 90 | 78 | 11.0 |
Product Structure & Dimensions
Get a Quote
Send us your wire size, stud size and quantity — we reply within 24 hours.
Looking for DTL Series DTL Series Copper-Aluminum Cable Lug?
Contact our team for product specifications and quotation inquiries.
Frequently Asked Questions
Why is a bimetal lug needed for aluminium cable?
Direct contact between aluminium and copper creates a galvanic cell that corrodes the aluminium over time. A bimetal DTL lug has a 1060 aluminium barrel for the cable and a T2 copper palm for the busbar, with the transition zone permanently bonded by friction welding or cold pressing to prevent corrosion.
What wire sizes does the DTL Series cover?
6–300 mm² (10 AWG – 600 kcmil).
Can DTL lugs be used outdoors?
Yes. The tin-plated copper palm and anodised aluminium barrel are suitable for outdoor switchgear and substation connections, but they should be protected from direct rainfall where possible.
What crimp method should be used?
Hydraulic hex-crimp for all DTL sizes; use dies matched to the aluminium barrel cross-section.
Are DTL terminals suitable for 60 Hz power systems?
Yes. DTL terminals are rated for AC and DC up to the voltage rating of the insulation system of the cable being terminated.