Cable Lugs
OT, DT, JG and more copper lugs for heavy-duty use.
OT, DT, JG and more copper lugs for heavy-duty use.
DT Series copper connecting terminals are pressed from T2 copper bar and tin-plated. The closed oil-stop barrel is sealed at the palm end, so crimped joints on distribution panels and cable runs stay free of moisture and compound.
View Series
DL Series aluminium connecting terminals are pressed from 1060 aluminium bar. They are the usual choice for aluminium cable on distribution equipment where a copper lug would create a dissimilar-metal joint.
View Series
DTL Series copper-to-aluminium bimetal cable lugs have a T2 copper palm friction-welded or cold-pressed to a 1060 aluminium barrel. The transition eliminates galvanic corrosion at the aluminium-to-copper interface and allows aluminium cable to terminate on copper busbars in switchgear and transformers.
View Series
DT Series copper connecting terminals are pressed from T2 copper bar and tin-plated. The closed oil-hole barrel traps lubricant during crimping to reduce crimp force and improve conductor fill. Used for heavy-power terminations on motors, switchgear busbars and transformer tap changers.
View Series
SC(JGK/JGA) Series tin-plated copper cable lugs are drawn from seamless copper tube and tin-plated, then fitted with a PVC insulating sleeve over the barrel. The heavy-wall construction withstands the forces of hydraulic or mechanical crimping and provides a corrosion-resistant termination for panel boards and motor terminals.
View Series
OT-A Series open-barrel copper cable lugs are stamped from red copper sheet. The open C-shape barrel accepts the conductor from the side and is then closed by crimping, which suits inline field terminations where the cable end is not accessible. Tin-plated option available.
View Series
Imported C45 pin, material red copper tube, surface tin-plated. Designed for heavy-duty cable terminations in power distribution, industrial equipment and electrical panels. Covers conductor cross-sections from 10 mm² to 240 mm².
View SeriesInsulated terminals specified across automotive, appliance, machinery and power equipment manufacturing.
Panel builders use ring and fork terminals for PLC I/O wiring, contactors and terminal blocks where a secure screw connection is required.
Harness makers specify colour-coded insulated terminals for lighting, sensor and power circuits, where vibration resistance matters.
Washing machines, air conditioners and ovens rely on fully insulated terminals for internal wiring that must stay safe and compact.
Machine builders fit ring, fork and disconnect terminals to motors, sensors and control cabinets operating in demanding environments.
Switchgear and distribution boards use tin-plated copper terminals for stable current transfer and resistance to corrosion.
Cable lugs terminate large copper or aluminum cables to studs, busbars and equipment terminals in power distribution, switchgear, transformers and industrial machinery. They provide a high-current, low-resistance connection that a small terminal cannot handle.
PHOENIX supplies DT copper lugs, DL aluminum lugs, DTL copper-aluminum lugs, JG copper connecting lugs, SC / JGA imported copper lugs and OT open-type lugs. Each series is designed for specific conductor materials and current levels.
DT lugs are made of copper and suit copper conductors with excellent conductivity and corrosion resistance. DL lugs are made of aluminum for aluminum cable, reducing weight and cost in large-cross-section power applications. Always match the lug material to the cable.
DTL lugs have a copper barrel and an aluminum palm, or a bimetal construction, allowing an aluminum cable to be connected to a copper busbar or terminal. They are common in substations and distribution panels where mixed metals meet.
Oil-blocking lugs include a sealed barrel design that prevents oil or moisture from wicking along the conductor into the connection. They are used in transformers, oil-filled equipment and outdoor installations where sealing matters.
JG and SC (JGA) lugs are copper connecting terminals used to join cable to flat busbars or equipment pads. The wide palm spreads the contact area and fits standard bolt patterns, making them common in switchgear and panel boards.
Match the barrel bore to the cable cross-section and the palm hole to the stud or bolt diameter. Common bolt holes are M6 to M16 and cable sizes range from 10 mm² to 300 mm². Refer to the series table for exact dimensions.
Large lugs require a hydraulic crimping tool with dies matched to the cable and barrel size. Crimp from the barrel end toward the palm, apply full pressure, and check the crimp compression. A proper crimp gives a gas-tight, low-resistance joint.
OT open-type lugs have a split barrel that allows the cable to be inserted from the side, useful when the cable end is already terminated or access is limited. GT-1 is a matching accessory for certain OT styles.
Yes. All PHOENIX copper and aluminum lugs are produced in compliance with RoHS directives, with tin-plated finishes where required and lead-free materials, suitable for international export.
Tell us your wire size and requirements, and we will help you find the right solution.
Request a Quote