Screw-On Wing Wire Connectors with Spring Insert WN Series
Wire Connectors WN Series

Screw-On Wing Wire Connectors with Spring Insert

WN Series screw-on wire connectors (wire nuts) are twist-on splices with a brass spring insert inside a flame-retardant nylon cap. Spinning the cap onto two or more conductors causes the spring to grip and coil the wires together without stripping or tools. Standard in residential, commercial and light-industrial wiring.

Material
Flame-retardant thermoplastic, spring insert
Wire Range
22–10 AWG, 2–4 conductors
Models
WN1, WN2, WN3, WN4, WN6, WN8
Height (A)
15.2–32.2 mm
Base Diameter (B)
8.6–18.3 mm
Top Diameter (C)
6.7–12.8 mm
Type
Screw-on wing connector, with spring insert
Colors
Grey, Orange, Red, Blue, Black, Yellow

WN Series Screw-On Wing Wire Connectors with Spring Insert Specifications

Complete product dimensions and model selection.

Item No.Suitable Wire No. & A.W.GDimensionColor
A (inch / mm)B (inch / mm)C (inch / mm)
WN1MIN #20×1 + #22×1
MAX #16×2
.598 / 15.2.339 / 8.6.264 / 6.7Grey Orange / Red
WN2MIN #20×3
MAX #16×3
.693 / 17.6.386 / 9.8.291 / 7.4Blue Orange / Black
WN3MIN #20×3
MAX #16×3 + #18×1
.866 / 22.0.472 / 12.0.390 / 9.9Orange Yellow / Black
WN4MIN #14×1 + #18×1
MAX #14×4 + #18×1
.965 / 24.5.551 / 14.0.433 / 11.0Yellow Grey / Orange Red
WN6MIN #14×2
MAX #10×2 + #12×2
1.079 / 27.4.661 / 16.8.500 / 12.7Red
WN8MIN #12×3
MAX #10×4
1.286 / 32.2.720 / 18.3.504 / 12.8Grey

Product Structure & Dimensions

Screw-On Wing Wire Connectors with Spring Insert structure and dimensions

Get a Quote

Send us your wire size, stud size and quantity — we reply within 24 hours.

Looking for WN Series Screw-On Wing Wire Connectors with Spring Insert?

Contact our team for product specifications and quotation inquiries.

Contact Us

Frequently Asked Questions

What are screw-on wire connectors (wire nuts) used for?

Wire nuts are twist-on connectors for splicing two or more insulated copper conductors without soldering or crimping. They are the standard method for in-box splices in residential and commercial electrical wiring.

What wire sizes does the WN Series accept?

22–6 AWG (0.5–16 mm²) across four colour-coded sizes.

How are wire nuts installed?

Strip 12–15 mm of insulation, hold the conductors parallel, then spin the cap clockwise until it is tight and the wires rotate together with the cap.

Are WN wire nuts listed to any standard?

Yes. WN Series connectors comply with UL 486C and IEC 60998-2-1.

Should electrical tape be added over the wire nut?

Tape is not required by code but adds extra strain relief. If used, wrap one layer under the cap flange and two layers over the stripped wire ends.