Non-Insulated Butt Connectors
BNT Series non-insulated butt and parallel connectors are cut from seamless copper tube and tin-plated. They join two conductors end to end without insulation, then the joint is taped or covered with heat shrink.
- Material
- Copper (bare, non-insulated)
- Wire Range
- 22-8 AWG / 0.5-38 mm²
- Available Models
- BNT 1, BNT 2, BNT 3, BNT 5, BNT 8, BNT 14, BNT 22, BNT 38
- Length (L)
- 15.0-32.0 mm
- Inner Diameter (d)
- 2.1-10.0 mm
- Outer Diameter (ΦD)
- 3.3-13.0 mm
- Connection Type
- Butt splice, double-crimp
- Packaging
- 100PCS / 500PCS / 1000PCS
BNT Series Non-Insulated Butt Connectors Specifications
Complete product dimensions and model selection.
| Item No. | Applicable Wire AWG#(mm²) | L±0.5 | d±0.3 | ΦD±0.3 | Packaging |
|---|---|---|---|---|---|
| BNT 1 | 22-16(0.5-1.5) | 15.0 | 2.1 | 3.3 | 1000PCS |
| BNT 2 | 16-14(1.5-2.5) | 15.0 | 2.8 | 4.0 | |
| BNT 3 | 3-4″ | 15.0 | 3.4 | 5.0 | 500PCS |
| BNT 5 | 12-10(4-6) | 15.0 | 4.0 | 5.5 | |
| BNT 8 | 8-10 mm | 21.0 | 5.0 | 7.0 | |
| BNT 14 | 14-16 mm | 26.0 | 6.3 | 8.9 | 100PCS |
| BNT 22 | 22-25 mm | 29.0 | 8.3 | 11.3 | |
| BNT 38 | 35-38 mm | 32.0 | 10.0 | 13.0 |
Product Structure & Dimensions
Get a Quote
Send us your wire size, stud size and quantity — we reply within 24 hours.
Looking for BNT Series Non-Insulated Butt Connectors?
Contact our team for product specifications and quotation inquiries.
Frequently Asked Questions
What are BNT Series connectors used for?
BNT connectors join two conductors end to end or side by side. They are non-insulated, so the finished joint is taped, sleeved or covered with heat shrink after crimping.
Which wire sizes does BNT cover?
From 22 AWG (0.5 mm²) to 38 mm² across eight items: BNT1 (0.5–1.5), BNT2 (1.5–2.5), BNT3 (3–4), BNT5 (4–6), BNT8 (8–10), BNT14 (14–16), BNT22 (22–25) and BNT38 (35–38 mm²).
Why is the barrel made from seamless tube?
A seamless copper tube has no brazed seam to split when the crimp expands the barrel. That matters on a butt joint, where both ends are compressed and the middle of the barrel takes the highest hoop stress.
How do I crimp a butt connector so the joint stays reliable?
Insert one conductor until it reaches the stop in the middle of the barrel, crimp that side, then insert the second conductor and crimp the other side with the same die. Keep the two crimps in the same plane and check that no strands sit outside the barrel.
Do I need to insulate the joint afterwards?
Yes. BNT is a bare connector — cover the finished splice with heat shrink or PVC tape to keep moisture out. A joint left bare will corrode at the strand ends, which is the usual cause of a splice failing years later.
Are BNT connectors RoHS compliant and what packing do they come in?
Tin-plated copper, lead-free, RoHS and REACH compliant. Packing is 1000 pieces for the small sizes, 500 for BNT3–BNT8 and 100 for BNT14 and above.