Vinyl-Insulated Parallel Connector PVT Series
Wire Connectors PVT Series

Vinyl-Insulated Parallel Connector

PVT Series insulated parallel connectors accept two conductors side by side in a copper tube sleeve and crimp them in a single operation. The tap connection is made without cutting the main conductor, which is the standard method for adding branch circuits to an existing wire run.

Material
Copper tube, vinyl insulated
Wire Range
22–10 AWG / 0.5–6 mm²
Models
PVT 1, PVT 2, PVT 5
Barrel Length (E)
8.0–8.5 mm
Total Length (L)
16.0–20.0 mm
Outer Diameter (ΦD)
4.0–6.3 mm
Connection Type
Parallel splice
Packaging
500 PCS

PVT Series Vinyl-Insulated Parallel Connector Specifications

Complete product dimensions and model selection.

Item No.Applicable WireE (mm)L (mm)ΦD (mm)Packaging
PVT 122–16 AWG (0.5–1.5 mm²)8.016.04.0500 PCS
PVT 216–14 AWG (1.5–2.5 mm²)8.016.04.5
PVT 512–10 AWG (4–6 mm²)8.520.06.3

Product Structure & Dimensions

Vinyl-Insulated Parallel Connector structure and dimensions

Get a Quote

Send us your wire size, stud size and quantity — we reply within 24 hours.

Looking for PVT Series Vinyl-Insulated Parallel Connector?

Contact our team for product specifications and quotation inquiries.

Contact Us

Frequently Asked Questions

How does a parallel connector make a connection without cutting the main wire?

The main conductor passes straight through the slot on one side and exits the other. A branch wire is inserted into the branch slot. When the two halves are crimped together, both conductors are captured in the connector without stripping either one.

What wire sizes does the PVT Series accept?

22–10 AWG (0.5–6 mm²), colour-coded red, blue and yellow.

Is the insulation vinyl or nylon?

Both versions are available: vinyl (PVC) for general wiring, nylon for higher-temperature and chemical-resistant applications.

Can the PVT parallel connector be reused?

No. Once crimped, the barrel is permanently deformed and cannot be safely re-opened.

What tool is used?

A ratchet crimping plier matched to the connector barrel cross-section; the same tool used for insulated butt connectors.