Long Full-Insulated Butt Connector
BHT Series heat-shrink butt connectors combine a tin-plated copper splice tube with a dual-wall polyolefin sleeve pre-coated with hot-melt adhesive. After crimping, heating the sleeve seals both wire entries against moisture, making this connector the preferred choice for marine, agricultural and outdoor repair applications.
- Material
- Copper tube, heat-shrink insulated
- Wire Range
- 22–10 AWG / 0.5–6 mm²
- Models
- BHT 0.5, BHT 1.25, BHT 2, BHT 5.5
- Outer Diameter (ΦD)
- 3.0–6.9 mm
- Inner Diameter (d)
- 2.6–5.3 mm
- Total Length (L)
- 25.0–42.0 mm
- Connection Type
- Butt splice, fully insulated
- Packaging
- 500 PCS / 200 PCS
BHT Series Long Full-Insulated Butt Connector Specifications
Complete product dimensions and model selection.
| Item No. | Applicable Wire AWG(mm²) | ΦD±0.3 | d±0.3 | L±0.5 | Packaging |
|---|---|---|---|---|---|
| BHT 0.5 | 22–18 (0.5–0.75) | 3.0 | 2.6 | 25.0 | 500 PCS |
| BHT 1.25 | 18–16 (0.75–1.5) | 4.75 | 3.2 | 37.0 | |
| BHT 2 | 16–14 (1.5–2.5) | 5.6 | 3.7 | 37.0 | |
| BHT 5.5 | 12–10 (4–6) | 6.9 | 5.3 | 42.0 | 200 PCS |
Product Structure & Dimensions
Get a Quote
Send us your wire size, stud size and quantity — we reply within 24 hours.
Looking for BHT Series Long Full-Insulated Butt Connector?
Contact our team for product specifications and quotation inquiries.
Frequently Asked Questions
What is a heat-shrink butt connector?
A heat-shrink butt connector is a copper splice tube inside a dual-wall polyolefin sleeve pre-coated with hot-melt adhesive. After crimping, the sleeve is heated until it shrinks onto both wire entries and the adhesive forms a moisture-proof seal.
What wire sizes does the BHT Series accept?
22–10 AWG (0.5–6 mm²), colour-coded red, blue and yellow.
How much heat is needed to activate the sleeve?
Apply a heat gun at 90–120 °C until the sleeve has fully contracted and a bead of adhesive is visible at both ends. The process takes 10–20 seconds per connector.
Are BHT connectors reversible?
No. The heat-activated adhesive bond is permanent. Cut and replace if rework is needed.
Where are heat-shrink butt connectors most commonly used?
Marine wiring, trailer harnesses, agricultural machinery, underbonnet automotive wiring and outdoor low-voltage circuits where moisture intrusion must be prevented.