Fork Crimp Terminals UT Series
Non-Insulated Terminals UT Series

Fork Crimp Terminals

UT Series fork crimp terminals are made from the same tin-plated copper tube as the OT ring series. The open fork allows the terminal to be installed or removed without fully loosening the fastener, which saves time during panel assembly and field maintenance.

Terminal Material
Red copper (tin-plated)
Wire Range
22–1 AWG / 0.5–50 mm²
Stud Size
M3 – M10
Surface Treatment
Tin-plated

UT Series Fork Crimp Terminals Specifications

Complete product dimensions and model selection.

Item No. Dimension Packaging
Φ±0.3 B±0.3 L±0.5 E±0.3 D±0.3 C±0.3 T±0.03
UT0.5-33.26.013.5 4.02.21.20.5 2000 PCS
UT0.5-44.27.013.8
UT1-33.25.715.5 5.03.21.80.7
UT1-44.27.116.0
UT1.5-33.25.915.5 5.03.62.20.7 1000 PCS
UT1.5-44.27.316.5
UT1.5-55.29.018.3
UT1.5-66.211.820.0
UT1.5-88.214.623.7
UT2.5-33.26.015.5 5.04.22.80.7
UT2.5-44.27.617.0
UT2.5-55.29.518.0
UT2.5-66.211.020.0
UT2.5-88.214.824.1
UT4-44.28.618.6 6.05.23.21.0 500 PCS
UT4-55.29.419.6
UT4-66.211.822.1
UT4-88.214.925.2
UT4-1010.518.027.0
UT6-44.29.019.5 7.06.24.21.0 1000 PCS
UT6-55.211.021.0
UT6-66.212.023.0
UT6-88.215.026.0
UT6-1010.517.430.0
UT10-44.210.024.0 8.58.05.61.2 500 PCS
UT10-55.210.024.0
UT10-66.212.027.0
UT10-88.214.428.6
UT10-1010.516.331.5
UT16-55.211.526.0 11.010.07.01.5 200 PCS
UT16-66.212.529.5
UT16-88.216.032.0
UT16-1010.519.033.5
UT25-66.216.035.0 14.012.18.51.8
UT25-88.218.035.0
UT25-1010.520.035.0
UT35-66.214.536.0 14.013.19.51.8
UT35-88.217.540.0
UT35-1010.522.042.0

Product Structure & Dimensions

Fork Crimp Terminals structure and dimensions

Get a Quote

Send us your wire size, stud size and quantity — we reply within 24 hours.

Looking for UT Series Fork Crimp Terminals?

Contact our team for product specifications and quotation inquiries.

Contact Us

Frequently Asked Questions

What are UT Series fork crimp terminals used for?

UT Series fork crimp terminals connect copper cable to threaded studs and bolts. The open fork allows installation and removal without fully removing the fastener, which speeds up commissioning and maintenance on motor terminal boards, busbar systems and switchgear.

What wire sizes does the UT Series cover?

0.5–50 mm² (22–1 AWG), the same range as the OT ring series.

What is the difference between OT ring and UT fork terminals?

OT ring terminals fully encircle the stud, so the cable cannot accidentally fall free. UT fork terminals do not encircle the stud but can be installed and removed faster.

How is the barrel sealed on UT terminals?

The seamless barrel is the same pressed copper tube design as OT terminals. No separate seam exists.

What tool is used for crimping?

Hydraulic hex-die crimping tools for UT-10 and above; mechanical or ratchet tools for UT-6 and below.