Fork Non-Insulated Terminals
SNB Series fork non-insulated terminals are tin-plated copper with a brazed seam barrel. The open fork allows the terminal to be fitted or replaced without removing the screw, which is why it is widely used on control panels and terminal blocks.
- Terminal Material
- Copper
- Surface
- Tin-plated
- Wire Range
- 22–4 AWG / 0.5–22 mm²
- Stud Size
- #4 – 5/16
- Packaging
- 1000 / 500 / 100 PCS
SNB Series Fork Non-Insulated Terminals Specifications
Complete product dimensions and model selection.
| Wire Range | Item No. | Dimensions (mm) | Packaging | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Φ±0.3 | B±0.3 | L±0.5 | E±0.3 | D±0.3 | C±0.3 | T±0.03 | |||
| 22–16 AWG 0.5–1.5 mm² |
SNB1.25-3.2 | 3.2 | 5.7 | 16.0 | 4.8 | 3.4 | 1.9 | 0.75 | 1000 PCS |
| SNB1.25-3.5 | 3.7 | 5.7 | |||||||
| SNB1.25-4 | 4.2 | 6.4 | |||||||
| SNBM1.25-4 | 4.2 | 7.2 | |||||||
| SNB1.25-5 | 5.2 | 8.1 | |||||||
| SNB1.25-6 | 6.2 | 9.5 | |||||||
| 16–14 AWG 1.5–2.5 mm² |
SNB2-3.2 | 3.2 | 5.7 | 16.0 | 4.8 | 4.0 | 2.4 | 0.8 | |
| SNB2-3.5 | 3.7 | 5.7 | |||||||
| SNB2-4 | 4.2 | 6.4 | |||||||
| SNBM2-4 | 4.2 | 7.2 | |||||||
| SNB2-5 | 5.2 | 8.1 | |||||||
| SNBL2-5 | 5.2 | 9.3 | |||||||
| SNB2-6 | 6.2 | 9.3 | |||||||
| 14–12 AWG 2.5–4 mm² |
SNB3.5-4 | 4.2 | 8.0 | 18.0 | 6.0 | 5.0 | 3.0 | 1.0 | 500 PCS |
| SNB3.5-5 | 5.2 | 8.0 | 18.0 | ||||||
| SNB3.5-6 | 6.2 | 12.0 | 21.5 | ||||||
| 12–10 AWG 4–6 mm² |
SNB5.5-4 | 4.2 | 8.3 | 18.5 | 6.0 | 5.6 | 3.5 | 1.0 | |
| SNB5.5-5 | 5.2 | 9.0 | 18.5 | ||||||
| SNB5.5-6 | 6.2 | 9.0 | 18.5 | ||||||
| SNBL5.5-6 | 6.2 | 12.0 | 24.5 | ||||||
| SNB5.5-8 | 8.2 | 14.0 | 23.5 | ||||||
| 8 AWG 8 mm² |
SNB8-5 | 5.3 | 10.5 | 23.0 | 8.5 | 7.2 | 4.8 | 1.2 | 100 PCS |
| SNB8-6 | 6.3 | 10.8 | 24.0 | ||||||
| SNB8-8 | 8.3 | 14.0 | 28.5 | ||||||
| 6 AWG 14 mm² |
SNB14-5 | 5.3 | 12.0 | 29.0 | 10.5 | 9.0 | 6.0 | 1.5 | |
| SNB14-6 | 6.3 | 12.0 | 29.0 | ||||||
| SNB14-8 | 8.3 | 14.0 | 29.0 | ||||||
| 4 AWG 22 mm² |
SNB22-8 | 8.3 | 14.0 | 34.0 | 12.0 | 11.5 | 7.9 | 1.8 | |
Product Structure & Dimensions
Get a Quote
Send us your wire size, stud size and quantity — we reply within 24 hours.
Looking for SNB Series Fork Non-Insulated Terminals?
Contact our team for product specifications and quotation inquiries.
Frequently Asked Questions
What are SNB Series fork non-insulated terminals used for?
SNB terminals connect stranded copper wire to screw terminals and studs that need to be loosened for service. Because the fork is open, the terminal can be lifted off without removing the screw, and the joint is then covered with tape or a sheath.
Which wire sizes does SNB cover?
The range runs from 22 AWG (0.5 mm²) up to 4 AWG (22 mm²): 0.5–1.5, 1.5–2.5, 2.5–4, 4–6, 8, 14 and 22 mm² groups. Barrel diameter and wall thickness increase with the group, so the crimp stays proportional to the conductor.
How do I choose between SNB and SV?
SNB is the bare version and SV is the insulated version of the same fork geometry. Use SNB where the joint will be taped or sheathed anyway, or where the terminal sits inside a terminal block; use SV where the crimp must be insulated on the bench.
What stud sizes are available?
Fork openings run from #4 (Φ3.2 mm) to 5/16 (Φ8.3 mm), with 1/4 (Φ6.2 mm) as the most common size. Match the opening to the screw diameter — an oversized fork reduces contact area and lets the terminal shift under torque.
How should SNB terminals be crimped?
Use a ratcheting crimp tool with a die matched to the wire group, crimp once at the barrel centre, and inspect the seam. Avoid re-crimping in a different position: a second bite work-hardens the copper and can crack the brazed seam.
Are SNB terminals available in larger sizes for battery and earth cable?
Yes. SNB8, SNB14 and SNB22 cover 8, 14 and 22 mm² and are commonly used on earth studs and battery links. They are packed 100 pieces per bag and can be tin-plated to a thicker specification on request.