Blade Non-Insulated Terminals
DBN Series blade non-insulated terminals are stamped from copper strip and tin-plated. The bare flat tab is used where a separate insulating boot will be fitted, or in applications that require the smallest possible connector profile. Accepts 22–10 AWG copper wire.
- Terminal Material
- Copper (tin-plated)
- Wire Range
- 22–10 AWG / 0.5–6 mm²
- Contact Width
- 2.8 mm / 4.8 mm / 6.3 mm
- Surface Treatment
- Tin-plated
DBN Series Blade Non-Insulated Terminals Specifications
Complete product dimensions and model selection.
| Wire Range | Item No. | Dimension | Packaging | |||||
|---|---|---|---|---|---|---|---|---|
| B±0.3 | L±0.5 | E±0.3 | D±0.3 | C±0.3 | T±0.03 | |||
| 22–16 AWG 0.5–1.5 mm² |
DBN1.25-10 | 2.4 | 15.0 | 5.0 | 3.4 | 1.9 | 0.75 | 1000 PCS |
| DBN1.25-14 | 2.4 | 19.0 | ||||||
| DBN1.25-18 | 2.4 | 23.0 | ||||||
| 16–14 AWG 1.5–2.5 mm² |
DBN2-10 | 2.5 | 15.0 | 5.0 | 4.0 | 2.4 | 0.8 | |
| DBN2-14 | 2.5 | 19.0 | ||||||
| DBN2-18 | 2.5 | 23.0 | ||||||
| 12–10 AWG 4–6 mm² |
DBN5.5-10 | 2.8 | 17.5 | 6.0 | 5.6 | 3.5 | 1.0 | 500 PCS |
| DBN5.5-14 | 4.5 | 20.0 | ||||||
| DBN5.5-18 | 4.5 | 24.0 | ||||||
| 8 AWG 8 mm² |
DBN8-14 | 5.0 | 22.5 | 8.5 | 7.2 | 4.8 | 1.2 | 200 PCS |
| 6 AWG 14 mm² |
DBN14-16 | 6.0 | 26.5 | 10.5 | 9.0 | 6.0 | 1.5 | |
Product Structure & Dimensions
Get a Quote
Send us your wire size, stud size and quantity — we reply within 24 hours.
Looking for DBN Series Blade Non-Insulated Terminals?
Contact our team for product specifications and quotation inquiries.
Frequently Asked Questions
When should I choose a non-insulated blade terminal over an insulated one?
Choose non-insulated when a separate insulating boot or housing will be installed over the tab, or when the connection is inside a fully enclosed connector body that provides its own insulation. Non-insulated terminals also offer a lower profile where height clearance is tight.
What wire sizes does the DBN Series accept?
22–10 AWG (0.5–6 mm²), no colour coding.
What tab widths are available?
2.8 mm, 4.8 mm and 6.3 mm.
Is tin-plating standard?
Yes. All DBN Series terminals are tin-plated to prevent oxidation during storage and to ease soldering if the tab is additionally soldered.
What crimping tool is required?
Any calibrated ratchet or manual crimping tool that matches the wire cross-section and the non-insulated barrel profile.