Tubular Bare Terminal GT Series
Wire Ferrules GT Series

Tubular Bare Terminal

GT Series non-insulated wire ferrules are rolled from tin-plated copper tube. The ferrule consolidates stranded wire into a solid round section, so the conductor seats cleanly in a terminal block or spring cage without stray strands.

Material
Tin-plated copper tube
Wire Range
22–4 AWG / 0.5–150 mm²
Type
Non-insulated, single wire
Packaging
2000 / 1000 / 500 / 200 / 100 PCS

GT Series Tubular Bare Terminal Specifications

Complete product dimensions and model selection.

Item No. Wire Range
(mm²)
L
(mm)
D
(mm)
F
(mm)
Packaging
GT-0.5-6 0.5 6 1.8 6.0 500pcs
GT-0.5-8 0.5 8 1.8 8.0
GT-0.5-10 0.5 10 1.8 10.0
GT-0.75-6 0.75 6 2.3 6.0
GT-0.75-8 0.75 8 2.3 8.0
GT-0.75-10 0.75 10 2.3 10.0
GT-1.0-8 1.0 8 2.7 8.0
GT-1.0-10 1.0 10 2.7 10.0
GT-1.0-12 1.0 12 2.7 12.0
GT-1.5-8 1.5 8 3.2 8.0
GT-1.5-10 1.5 10 3.2 10.0
GT-1.5-12 1.5 12 3.2 12.0
GT-2.5-8 2.5 8 3.9 8.0
GT-2.5-10 2.5 10 3.9 10.0
GT-2.5-12 2.5 12 3.9 12.0
GT-4-10 4 10 4.8 10.0 200pcs
GT-4-12 4 12 4.8 12.0
GT-6-10 6 10 5.8 10.0
GT-6-12 6 12 5.8 12.0
GT-10-12 10 12 7.5 12.0 100pcs
GT-16-14 16 14 9.2 14.0
GT-25-16 25 16 11.2 16.0

Product Structure & Dimensions

Tubular Bare Terminal structure and dimensions

Get a Quote

Send us your wire size, stud size and quantity — we reply within 24 hours.

Looking for GT Series Tubular Bare Terminal?

Contact our team for product specifications and quotation inquiries.

Contact Us

Frequently Asked Questions

What is a GT Series wire ferrule used for?

A ferrule consolidates stranded wire into a solid round section before it enters a terminal block, spring cage or breaker. Without one, strands spread under the clamp screw, contact resistance rises and a few strands usually break off during tightening.

Which wire sizes does GT cover?

From 22 AWG (0.5 mm²) to 150 mm². Small sizes are supplied in 8, 10 and 12 mm lengths, mid sizes add 15 and 18 mm, and heavy sizes run to 25, 30, 32 and 40 mm so the ferrule can pass through deep terminal blocks.

How do I pick the ferrule length?

Match the ferrule to the clamping depth of the terminal: 8 mm for DIN rail terminals, 10–12 mm for most contactors and breakers, 18 mm and above for deep fuse holders and stud connections. The ferrule should fill the clamp without protruding past the plastic body.

Which crimping tool do I need?

The catalogue pairs each size with a tool: FXT2000L for 0.5–4 mm², FXT2000M for 6–16 mm², FXT2000N for 25–35 mm² and FXT2000P for 50 mm². The die profile is square, which is the shape required by most terminal block standards.

What is the difference between GT and E Series ferrules?

GT is the bare tin-plated copper tube; E Series adds a colour-coded insulating collar. The collar identifies the wire range and covers the crimp, but the metal ferrule underneath does the electrical work in both cases.

Are GT ferrules RoHS compliant and how are they packed?

They are drawn from tin-plated copper with no lead in the plating and meet RoHS and REACH. Packing runs from 2000 pieces for 0.5–4 mm² down to 100 pieces for 95–150 mm²; custom lengths and multi-colour kits are available for OEM orders.