Fully Insulated Terminals
FDFD Series fully insulated disconnect terminals encase the entire contact in nylon so there is no exposed metal on either the male or female half. This double-insulated design is mandatory in high-density wiring where accidental bridging between adjacent connectors must be prevented.
- Terminal Material
- Copper
- Insulation Material
- Nylon
- Wire Range
- 22–10 AWG / 0.5–6 mm²
- Insulation Colors
- Red, Blue, Yellow
- Tab Size
- 2.8 mm / 4.8 mm / 6.3 mm
FDD Full Insulated Type Fully Insulated Terminals Specifications
Complete product dimensions and model selection.
| Wire Range | Item No. | Head Size (mm) | Dimension | Packaging | ||||
|---|---|---|---|---|---|---|---|---|
| B±0.3 | L±0.5 | E±0.3 | D±0.3 | T±0.03 | ||||
| 22–16 AWG 0.5–1.5 mm² |
FDFD1.25-110(5) | 0.5×2.85 | 3.0 | 19 | 10.5 | 4.0 | 0.3 | 500 PCS |
| FDFD1.25-187(5) | 0.5×4.75 | 5.0 | 20.5 | |||||
| FDFD1.25-250(8) | 0.8×6.35 | 6.6 | 23 | 0.4 | ||||
| 16–14 AWG 1.5–2.5 mm² |
FDFD2-110(5) | 0.5×2.85 | 3.0 | 19 | 10.5 | 4.5 | 0.3 | |
| FDFD2-187(5) | 0.5×4.75 | 5.0 | 20.5 | |||||
| FDFD2-250(8) | 0.8×6.35 | 6.6 | 23 | 0.4 | ||||
| 12–10 AWG 4–6 mm² |
FDFD5.5-250(8) | 0.8×6.35 | 6.6 | 26.2 | 14.5 | 6.3 | 0.4 | |
Product Structure & Dimensions
Get a Quote
Send us your wire size, stud size and quantity — we reply within 24 hours.
Looking for FDD Full Insulated Type Fully Insulated Terminals?
Contact our team for product specifications and quotation inquiries.
Frequently Asked Questions
What makes FDFD terminals "fully insulated"?
Both the male pin and the female socket are enclosed in nylon so no live metal is exposed after mating. Standard blade terminals leave the shoulder of the tab partially exposed; FDFD terminals do not.
Where are FDFD fully insulated terminals used?
They are required in applications with adjacent connectors at different voltages, in IEC 61140 Class II equipment and wherever accidental bridging between adjacent contacts would cause a short circuit.
What are the available sizes?
The series covers 22–10 AWG (0.5–6 mm²) with 2.8 mm, 4.8 mm and 6.3 mm contact widths.
Are FDFD terminals IP-rated?
The mated pair is splash-resistant but not submersion-rated. For fully waterproof connections, use the heat-shrink RHB or SHB series.
Can I use a standard blade crimping tool?
Yes, the same FXT Series ratchet tool used for the insulated blade family applies.